All Work Boat Commercial Vessels for sale in North America
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built in Scotland in 1928
NO rust or weak spots and NO leaks.
Dimensions:
26'6" x 8'...
read more
Year: | 1928 |
Length: |
26' 6" |
Location: |
Massachusetts USA |
Price: | $19,950 |
View Details |
33' X 10' Workboat With Winch
Cummins motor
Fitted with a winch
Located in Quebec
Price: $13,250 CDN...
read more
Length: |
33' |
Location: |
Quebec Canada |
Price: | $13,250 |
View Details |
1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat
Price: $220,000 USD
With fresh coatings and loads of updates, she’s ready to get to work!
Former US Coast Guard vessel
4′ draft
Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours
ZF gears
Electronics: 2 – 12″ Garmins, 2 VHF, radar
New shafts, cutless bearings, couplings, props just reworked
New bottom and hull paint
Comes with lots of spare parts
Location: Mississippi...
read more
Year: | 1979 |
Length: |
41' |
Location: |
Mississippi USA |
Price: | $220,000 |
View Details |
New 19′ x 8′ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $25,000 CDN
Fully welded 3/16″ aluminum hull
Rated for 90hp
Self bailing floor/sole drains overboard
Large waterproof storage areas in bow and sides and covered battery storage in transom
Waterproof breaker panel
LED nav lights
Built in fuel tank with gauge
Capacity 5 people
Custom options available
Location: Western Canada
File ref W2394...
read more
Year: | 2020 |
Length: |
19' |
Location: |
Manitoba Canada |
Price: | $25,000 |
View Details |
New 15′ x 68″ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $6,500 CDN
Fully welded 3/16″ aluminum hull
20″ Transom
Capacity 2-4 people
Options available: custom lighting and power for electronics, mounts for fish finders and trolling motors, flat floor/sole, non-skid coatings on sole and stepping surfaces, removable seats or cushions, extended bow deck and storage compartment, other custom options available!
Location: Western Canada
File Ref W2393...
read more
Year: | 2020 |
Length: |
15' |
Location: |
Manitoba Canada |
Price: | $6,500 |
View Details |
1974 31’6 x 8’5 Aluminum Work/Crew Boat & Trailer
Price: $75,000 CDN
This rugged workboat has been re-powered and she’s ready to get the job done!
18″ draft
GRT:5.71
Powered by 2 Mercury MerCruiser Quicksilver 350 MPI, year: 2019
Total hp: 520
Berkley jet drives: 2019
New wiring: 2019
Fuel capacity 400 litres
12 passenger
Viking fire system
Electronics: VHF, Garmin 721xs GPS
3 axle trailer included
Location: Southern Ontario...
read more
Year: | 1974 |
Length: |
31' 6" |
Location: |
Ontario Canada |
Price: | $75,000 |
View Details |
1999 48’10 x 13’7 Aluminum Twin Screw Fishing/Work Boat w/Trailer
New Price: $200,000 CDN
Previously Transport Canada Approved
Stability Book Available
GRT: 20.23, NRT: 15.17
Draft approx 3′
Powered by twin Perkins M130C (2014), 130hp each, hours: 900 and 700
Fuel capacity: 693 litres
Holding tank capacity: 267 litres
Inverter: Tundra HD 2500
Electronics: VHF, depth sounder, compass
Hydraulic steering
Wabasco heater
Safety equipment: fire extinguisher, life ring, fire pump
Bilge pump
Deck wash pump
Accommodations for 4
Comes with trailer
This vessel has bee...
read more
Year: | 1999 |
Length: |
48' 10" |
Location: |
Manitoba Canada |
Price: | $200,000 |
View Details |
Available with Short delivery options.
SPECIFICATIONS
Hull : Configured as conventional twin-screw workboat,This vessel is design for dredging asist and supply. With large deck area vessel can transport heavy supplies inluding pipes and anchors of the dredgers.
STANDART EQUIPMENTS
MotorBarge 1505 Series outfitted to high standards in a compact space for crew of up to 4 people. The accommodation deck consists of a combined mess and pantry, One double crew cabins with a shared en-suite. The wheelhouse is designed for maximum all-round visibility from the forward control station, with c...
read more
1980 19.05m x 6m x 11.35m Steel Ex CCG Buoy Tender
Built by Canadian Dredge & Dock Co., Kingston, Ontario
Class Voyage: Inland Waters II
Taken out of service in 2010
Length (LOA): 19.05m
Breadth: 6m
Depth (moulded): 1.71m
Draft: 1.35m
GRT: 79.78 tons
NRT: 33.34 tons
Freeboard: 1m
Cruising range: 2000 nautical miles
Endurance: 10 days
Cruising speed: 10 knots
Fuel capacity: 20 m3
Fresh water capacity: 6.2 m3
Fuel Consumption: 0.3 m3 per day
Navigation/Communication Equipment:
1 x AutoPilot - ComNav Marine 2001
1 x Digital Gyro Navigation 24V DC
...
read more
Year: | 1980 |
Length: |
19.05m |
Location: |
Ontario Canada |
Price: | $499,000 |
View Details |
1995 17′ x 6.5′ x 1′ Steel Flat Bottom Jet Propelled Work Boat
Price: $3,500 CDN
•Jet: Hamilton Jet
• Engine: 302 Ford Mercruiser- gas
• Top speed 30 to 35mph
• Great shallow draft work Boat
•Includes single axle trailer
Located in Port Dover, Ontario...
read more
Year: | 1995 |
Length: |
17' |
Location: |
Ontario Canada |
Price: | $3,500 |
View Details |