All Fishing Boat Commercial Vessels for sale in North America
- Stock #285249 -
Tonanco 729 gear! 4k gallons fuel capacity! 35 kW Isuzu 4BG1 & 6 kW Yanmar gen sets! Packs 40k# in (1) fish hold, blast-frozen! Includes tuna puller!
The 1967 Don Larson has been a solid Commercial Fishing Vessel for years. The current Owner worked the vessel the last 3 seasons. The 57 foot solid steel hull has weathered multiple storms, and takes rough weather quite well for its small size. The Don Larson is capable of staying out at sea for over a month at a time.
This boat was formerly known as the Medallion and was used to fish salmon as well as tuna. It has been kn...
read more
Year: | 1967 |
Length: | 57' |
Location: | Washington USA |
Price: | $124,900 Tax Not Paid |
View Details |
1997 17.37m x 5.11m Steel Overnight Fishing Charter Boat
$390,000 CDN
Gross tonnage: 62 tons
Net tonnage: 47 tons
Builder: Wray Brown
Accommodations for 12 persons
Engine: 197 Volva Penta TAMD 71-B Diesel - 218 hp
Engine is heat exchanger cooled
Transmission: Twin Disc MG507-1, 2.99:1 ratio
Shaft: 2.5"
Estimated speed: 10 knots
Fuel Capacity: Total 440 gal
Electronics:
Icom VHF, Motorola VHF, Raytheon Radar, Garmin GPS,
Garmin GPS Map Plotter, Garmin GPS Map Plotter Colour/Sounder,
Raytheon Fish Finder, Ritchie Compass
Davit: For heavy lifting from dock to upper...
read more
Year: | 1997 |
Length: |
17.37m |
Location: |
Ontario Canada |
Price: | $350,000 |
View Details |
71’ x 18.5 x 6’ Steel Commercial Fishing Vessel
Price: $65,000 CDN
• Powered by Volvo 120A ( 270 to 290 hp)
• Capital Gear 3.88:1 ratio
• 44” x 40” 4 blade RH propeller
• 3 ½” shaft
• V-bottom
• Keel cooled
• New superstructure
• New Wiring
• 36’ open space behind wheelhouse
• Lots of headroom
• Great Ice breaking capabilities
• Furuno Radar
• Furuno Depth Sounder
• Silex GPS/Plotter
• 24volt and 32 volt starting system
• Two Lister diesel engines – ...
read more
Year: | 1947 |
Length: |
71' |
Location: |
Ontario Canada |
Price: | $65,000 |
View Details |
- Stock #309667 -
This is a GREAT Opportunity. This is ready to Rock and Roll and hit the high Seas. Shrimp here we come.
This custom-built shrimp trawler is ready to go out now.
Vessel was built of all welded steel construction by J & J Marine, Inc at Bayou LaBatre, Alabama during 1996. The boat is a typical twin-screw refrigerated double rigged trawler.
The wheelhouse contains many navigation and other equipment. On top the wheel house or in the rigging are radar scanners, many lights, and antennas.
The cabin is located forward of the wheelhouse. Located aft of cabin is the galley ...
read more
Year: | 1996 |
Length: | 90' |
Location: | Alabama USA |
Price: | $1,171,500 Tax Not Paid |
View Details |
- Stock #125415 -
True working shrimp boat, loaded and ready to go!
* Original one owner vessel, current owner commissioned this vessel in 1988, last Landry shrimp boat ever built.
* Seller has rigged up to accommodate with Skimmers and still has skimmer equipment to be included with it if interested.
* Dependability of this vessel is good for the long haul. There have been any trips and long hours for the crew of "Cap't Sid". It's a must when a heavy responsibility is in your hands.
* Navigation with autopilot in place and all communications electronics, GPS, Radar, Depth Finder, etc. ...
read more
Year: | 1988 |
Length: | 52' |
Location: | Alabama USA |
Price: | $65,000 Tax Not Paid |
View Details |
- Stock #387309 -
This custom built Rodriquez trawler is ready for shrimping. This is a one of a kind, built in famous Bayou le Batre.
This 1986 Rodriguez 81 shrimp boat, constructed in Bayou la Batre, Alabama is ready to hit the deep water. It is fueled by a Cummins KTA 1150 470 horsepower diesel inboard motor.
The steel hull is as solid as it can be. At eighty one feet and 3 inches, it has the length your crew would want in a shrimp rigger.
It has two cabins, one with two bunk beds and one captain's suite. The bridge has many updated instruments for your navigation needs.
The trawling ...
read more
Year: | 1986 |
Length: | 81' |
Location: | Mississippi USA |
Price: | $450,000 Tax Not Paid |
View Details |
1990 36′ x 9.3′ x 4.2’Steel Trapnetter/Minnow Boat
Price: $17,500 USD
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio
File FV2154
Details are deemed to be correct but are not guaranteed and should be individually verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636...
read more
Year: | 1990 |
Length: |
36' |
Location: |
Ohio USA |
Price: | $17,500 |
View Details |
- Stock #328533 -
This needs to go, ready to work today, one of a kind.
This 1993 Rodriguez 78-foot Shrimp boat, constructed in Bayou la Batre, Alabama is ready to hit the deep water. It is fueled by a Caterpillar 3412 540 horsepower diesel inboard motor.
The steel hull is solid as it can be. At seventy-eight feet, it has the length your crew would want in a shrimp rigger.
It has two cabins, one with two bunk beds and one captain's suite. The bridge has many updated instruments for your navigation needs.
The trawling nets are in great condition and as stated ready to go. The trawlers are...
read more
Year: | 1993 |
Length: | 78' |
Location: | Mississippi USA |
Price: | $450,000 Tax Not Paid |
View Details |
1948 39′ x 12.7′ Steel Paasch Trapnetter
Price: $30,000 USD
Of all the trapnetter hull designs, the Paasch can’t be beat for rough water!
Powered by Lehman Ford Diesel, 120hp (hours unknown)
Cruising speed: 9 -10 mph
Fuel capacity: 100 gal
Electronics: radio, depth sounder, compass
GRT:14, NRT: 10
Deck space: 10′ x 26′ (11’6 at widest breadth)
Hull thickness: 1/4″
Shaft: 2″ Prop: Bronze 3 blade
Steering: mechanical
Headroom: at least 5’11
Vertical capstan
Bilge pumps: 1
Weight: 18,000 lbs (estimated)
Height for trucking:...
read more
Year: | 1948 |
Length: |
39' |
Location: |
Ohio USA |
Price: | $30,000 |
View Details |
- Stock #239830 -
Custom Built Novi Ready To Make Money Today!
This Bruce Atkinson built Novi is in the water and ready to fish today. Custom built for her current and only owner in 2001, this vessel has been the flagship of her seller's fleet for two decades. This versatile vessel has the ability to be easily converted to a longliner, scalloper, or lobster boat.
Designed and built with no cost spared, the power package on this Novi includes a heat exchanger cooled 400HP Caterpillar 3406 main attached to a Twin Disc 516 with a 4.5:1 reduction ratio, a 4 inch stainless steel shaft, and a 4...
read more
Year: | 2001 |
Length: | 47' |
Location: | Massachusetts USA |
Price: | $346,000 Tax Not Paid |
View Details |