|Website:||Open website in new window|
Built in Iceland as a freezer trawler, this vessel was operated as a freezer trawler for several years before being converted into a fresh fish trawler. She can be easily converted again.
|Vessel type:||Fishing Trawler|
|No. of engines:||2|
|Engine model:||Caterpillar 3508-8|
|Cruising Speed:||11 Knots|
|Length over all:||26m|
|Water capacity:||38 Cubic Metres|
The accommodation is located in the front of the processing area. There are currently berths for 11 persons in 1x single,3 x double, and 1x four person cabins. On the main deck there is an oilskin and washing room, room for provisions, a galley and a mess room.
Gross/net tonnage: 201 / 74
Registered length: 23.33m
Fish hold: 160 m3
-The processing area is located on the main deck. The area is insulated with mineral wool and lined with plastic-covered plywood.
-The processing equipment consists of conveyors for transporting the fish from the reception bins, which are 72 m3, to the gutting station, the grading / washing bins are of good size to obtain superior good quality. Collecting bin in front of reception bins, washing bin with conveyor.
-The hold, which has a capacity 160 m3, is located under the main deck. The hold is insulated as a freezing hold.
-Winches : the two main winches are hydraulic driven, L3 tons, of type RAPP. The main winches are equipped with auto trawl, with a wire length- and tension measuring system from GARDAR. The auxiliary winches are hydraulic driven and comprise four sweep-line winches, 2 gilson winches, 3 auxiliary winches and net drum.
-Trawl deck equipment : The trawl area is arranged for two trawl. A vertically hydraulic operated stern gate is installed in front of the stern ramp and a hydraulic- operated hatch is located on top of the fish reception bin. Above the stern ramp is a trawl gallow with the trawl blocks. Over the fish reception bin hatch is a bipod mast, with blocks fitted to the transverse top beam.
-One hydraulic-driven deck crane is located on the trawl deck.
-Main engine was installed new in the year 2000. It is a Caterpillar 3508-8, with capacity 578 KW at 1200 rpm, The main engine is connected to reduction gear of type Ulstein and a 3-blade adjustable pitch propeller in a nozzle.
-There are two auxiliary engines are two, one Caterpillar of the type Caterpillar 3305, connected to a 125 KW 3 x220 V shaft generator and Voith hydraulic pump and Caterpillar 3304 connected to a 55 KW shaft generator.
3x220 V,50 Hz
The vessel is equipped with good quality navigational and fish-finding equipment, such as radars, echo sounders and a trawl monitoring system.
The particulars and specifications are supplied by the vendor and not SeaBoats. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.
Note: Indicated location is approximate general area only.