Description

All machinery and system are run every month. Boat need cosmetic, class and outfitting to go back into service. Should take very little to make these vessel ready to sail should someone chose to buy them where is, as. Built: Gulfcraft in 1997. Class: ABS. Four - KTA38M Cummins. Total 1350BHP each. Capacity: 280 LT. Speed: 21 knots. If both together with ID 4609, we will reduce price on each by $100,000 USD.

Specifications

Accommodation

Passengers: 90 Bench Class

Construction

1. Striker was built by Gulfcraft in 1997 and was built to ABS class but only had an ABS load line when delivered.
2. Striker is currently priced at $1,750,000 USD as is, where is, with immediate availability.
3. Option 1: Striker is alternatively priced at $2,750,000 USD delivered at Seacraft, with fresh USCG COI, fresh class, buyer name/home port/emblem welded on, fresh paint from “keel to mast” to buyer colors. Striker will take 60-90 days to deliver if someone chose this option.
4. Option 2: Striker is DP-1 ready; we have already installed a bow thruster with an auxiliary drive engine and electronic controls. If someone wanted to complete the DP-1 install, it would add $250,000 USD to Striker price and add 30 days to delivery.

All machinery and system are run every month. Boat need cosmetic, class and outfitting to go back into service. Should take very little to make these vessel ready to sail should someone chose to buy them where is, as.

Flag: US
USCG Subchapter T
Depth: 12’
Light Draft: 5’1’’
Loaded Draft: 6’6’’

Engine(s)

Capacities
Transferable Potable Water: 40,000 gallons
Transferable Fuel: 25,000 gallons
Engine Lube Oil: 530 gallons
Fuel discharge Rate: 90 GPM
Potable Water Discharge Rate: 600 GPM

Machinery
Four - KTA38M Cummins
Total 1350BHP each

Performance
Speed: 21 knots
Fuel Consumption: 220 USG/hr.

Electronics

Depth Sounder: Data marine 3000
CSP Monitoring: Equipped
GPS: 1 Furuno, 1 Micrologic
Radar(s): 2 - Furuno
VHF: 2 - Standard Horizon
SSB: 1 - SEA 222
Internet E-mail: Telarus

Disclaimer

The particulars and specifications are supplied by the vendor and not SeaBoats. Such information has not been verified and may be incorrect. Please do not rely on particulars and specifications unless you have verified their accuracy.

Location Map