| Scruton Marine Services | |
| 49 John Street, Port Dover, Ontario, N0A 1N7, Canada | |
| Contact: | MJ |
| Telephone: | Reveal Telephone Number |
Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.
Current View: All Scruton Marine Services Listings (80) | North American Listings Only (77)
Used Boats: Commercial Vessels: 80 Adverts Displaying: 51-80
2023 16’6 x 6′ Steel Workboat
Price: $6,500 CDN
12 gauge bottom, 14 gauge sides
20″ transom
Epoxy primed and painted
Makes the perfect little run-about!
Located in Port Dover, Ontario... read more
52' Steel Landing Craft $89,000
52.1’Â’ x 14’Â’ x 5.6Â’’ Landing Craft
Built inSan Diego, USA
Registered in Canada
Built 1944, Rebuilt 1982
Draft Light: 3’Â’6””
GRT: 28.06 tons
NRT: – 15.28
Hull: – Flat bottom recessed propellers, substantial hull protection for grounding and beaching (automatic loading ramps can be used)
Propulsion: (2) GM 6-71 Detroit Diesel/twin screw, 340hp
Speed: – 7 kts – 9 kts
Accommodations: – 2 (master,engineer/deck m... read more
70’ x 30’ x 7’ Hopper Barge $57,750
70’ x 30’ x 7’ Hopper Barge
•Built in USA – Registered in Canada
•125 cubic yard hopper
4 spud wells
•Clyde winch that lifts 2 x 35’ spuds
•1 compartment needs repairs
•Located on north shore of Lake Ontario
•Price $57,750 USD... read more 
1964 66′ x 23.5′ Steel Double Deck Passenger Vessel
New Price $399,000 CDN
GRT: 85.14, NRT: 63.86
197 Passenger
Draft 4.9'
Powered by twin John Deere diesels, 400hp
New genset
Cruising speed 8.5 knots
Vessel will have a four year certificate prior to sale
More information available for serious inquiries
Located in Nova Scotia
File Ref PV2274... read more 
1948 39′ x 12.7′ Steel Paasch Trapnetter
Price: $30,000 USD
Of all the trapnetter hull designs, the Paasch can’t be beat for rough water!
Powered by Lehman Ford Diesel, 120hp (hours unknown)
Cruising speed: 9 -10 mph
Fuel capacity: 100 gal
Electronics: radio, depth sounder, compass
GRT:14, NRT: 10
Deck space: 10′ x 26′ (11’6 at widest breadth)
Hull thickness: 1/4″
Shaft: 2″ Prop: Bronze 3 blade
Steering: mechanical
Headroom: at leas... read more
Mudcat MC915 Auger Dredge $132,500
Mudcat MC915 Auger Dredge
PRICE $132,500 CDN
Construction material – Steel
•Length : 38’ 11″
•Width : 9′ 0″
•Height : O.A.8’8′
•Weight : 21,000 lbs. & Dry
•Draft : 21″
•Floating Clearance : 6’9″
•Fuel Capacity : 360 gallons
•Pontoons : Two 36″ x 32″ x 330″
10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam fil... read more 
25′ x 14′ x 4′ Truckable Tug for Charter
•Charter Rate: $2,650/day + fuel
•2018 Marine Inland
•Twin 200 hp John Deere engines
•Lower and upper helm stations, winches fendering, ready to go
•Also available w/ 30′ x 50′ spud barge for $4,250/day + fuel
Location: NY state – can ship it anywhere!
File T2400... read more 
2022 40′ x 18′ Sectional Barge w/ Ramp
Price: $199,000 CDN
2 sections 40′ x 9′ x 46″ high
Ramp measures 14′
Shell plate thickness 3/16″
Barge capacity is 65,000 lbs
Ramp is 14′ long
Ramp capacity 14 ton
Location: Georgian Bay area, Ontario... read more 
1988 28′ x 8’6 Aluminum Work/Crew Boat
Price: $35,000 USD
3′ draft
Twin Mercruiser 5.7 MPI
Bravo 2 outdrives
Dual steering stations
Runs and drives
Push knee
Needs bottom paint and a little TLC
Location: New York State... read more 
2001 19′ x 8’6 SeaArk Aluminum Work Boat w/trailer
Price: $20,000 USD
18″ draft
No motor (had a 225 hp Mercury Optimax 2006)
4 picking eyes
Comes with trailer
Location: New York State... read more 
1995 19′ x 8’6 SeaArk Aluminum Work Boat
Price: $30,000 USD
18″ draft
Mercruiser 5.0 MPI, 260 hp
VHF radio
Location: New York State... read more
2021 27′ x 8’6 Steel Dump Barge $87,000
2021 27′ x 8’6 Steel Dump Barge
Price: $87,000 USD
Dump Box measures 12′ x 7′, capacity about 5,000 lbs
Honda gas powered hydraulic power pack
90 hp Mercury (2021) has 45 hours on it
8″ x 8″ x 8′ spuds
Shell plate thickness 3/16″
Location: British Columbia... read more 
1989 66′ x 20′ Steel 100 Passenger Boat Built by Kanter Yachts
New Price: $600,000 CDN
This beautiful boat is in very good condition
Draft 4’6″
GRT: 124.49 Net: 75
Class: Inland Waters Class II
100 passengers + 15 crew
Powered by Twin Ford Sabre Engines, Model 212, 6 cyl, 4 cycle, direct injection turbo charged and intercooled, rebuilt 2016
2 x 212hp @ 2,500 rpm
Reduction gears: PRM model 602 hydraulic reversing, 2.86:1
Cruises at 11 knots
Shaft 2.25″, ... read more
Cutter Basket for 14" Dredge $1,300
Cutter basket for 14” Dredge
 For sand
 Keyway 1"x 1/2'
 Shaft 4 1/4"
 Inside ring is 45 1/4"
 Inside of inside ring 38 1/2"
 Hub 12" deep x 8" ( 8"? is as best owner can tell/
It has to be turned over to measure)
 Like new
 Located in Michigan
 Price reduced from $1,700 USD to $1,300 USD... read more 
2021 25′ x 6’8 Steel & Aluminum Work Boat w/200 hp Evinrude and Trailer
Price: $55,000 CDN
This is the one you’ve been waiting for!
Steel hull with aluminum pilot house and sole
Draft is 6″
Powered by 200 hp Evinrude E-TEC G2 outboard (2018), 90 hours
Viper prop
Cruises at 25 mph
Electronics: GPS, Direction finder, Depth sounder, Compass
Hydraulic steering
Fuel capacity: 25 gallons
Bilge pump
Comes with new tandem trailer
Located near Port Dover, Ont... read more 
2022 21′ x 7′ Aluminum Work Boat w/70 hp Suzuki and Trailer
Price: $45,000 CDN
Meet the next great addition to your fleet!
Welded aluminum modified v hull
3/16″ hull
1/8″ sole
1 1/2″ pipe gunnels
2 spud pockets
4′ work platform
Motor is 2022 Suzuki 70 hp, 0 hours, Model DF70ATL
Aluminum prop
Deluxe tiller kit
Located near Port Dover, Ontario... read more 
2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps
•These custom units were designed as a bridge but could be used as 2 separate barges
•2 Barges – 60′ x 10′ x 3.5′
•3 Ramps – 20′ x 11.6′
•Top deck has 1′ over hang support with gussets
•Ramps: 1 barge has double ramps, 1 barge has a single ramp
•Designed to draw in the middle and lock together for one continuous length
•Materials – deck is 1... read more 
21' x 8' Aluminum Dory/Work Boat - NEW BUILD
â—¦Price: $CALL FOR CURRENT PRICING
â—¦3/16 floor with a 3" sub floor and 3/16 checker plate
â—¦3/16 walls with a 10" wide wash board
â—¦Weighs about 1500 lbs
â—¦Location: PEI, Canada
File Ref W2388... read more 
1948 (4) 10′ x 7′ x 50′ Sectional Barges
Price: $30,000 USD
Shell plate thickness 3/8″
GRT: 26
Good condition
Winch is American 50 B, powered by a Wisconsin V4 gas engine
Location: Michigan... read more 
2008 47’ x 14.6’ x 5’ Steel Model Bow Tug
Price: $400,000 CDN
Built in Port Lambton, Ontario
This tugboat is truckable
Gross tonnage: 18.14 tons
Net tonnage: 13.61 tons
Shell plate thickness: 3/16”
Framing: Tubing
Bulkheads: 3/16”
Headroom: Wheelhouse – 6.5’, Cabin – 7’, Engine room – 7’
Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours
Transmission: Twin Disc MG 5114 3:1 ratio
Generator: 7.5kw Onan
Shaft size: 3&rdquo... read more
2011 Mudcat 8" x 6" Aluminum Dredge $315,000
2011 Mudcat MC-910 Aluminum ENV Suction Dredge
Principal Dimensions and Characteristics
- Custom Built in 2011
- Length Over All: 11.62 m 38.11 feet
- Width: 2.74 m 9 feet
- Height Over All: 2.68 m 8.8 feet
- Draft: 533.4 mm 21 inches
- Floating Clearance: 1.80 m 5.9 feet
- Fuel Capacity: 1,325 liters 350 gallons
Floatation
- Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
- .25” thick marine grade aluminum formed with Internal Bulkhea... read more 
1990 36' x 9.3' x 4.2' Steel Trapnetter/Minnow Boat
Price: $17,500 USD- NEW PRICE!
•Powered by Chrysler 318, est 50 hours since rebuild
•Velvet drive transmission
•Cruising speed: 10 mph
•Fuel capacity: 50 gal
•GRT:9, NRT: 7
• Location: Ohio... read more 
1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities
FOR CHARTER ONLY AT THIS TIME
•Gross Tons: 140
•Flag: Canadian
•Powered by: (2) 455hp diesel Z-drives and a hydraulic tunnel bow thruster
• (3) manually controlled 7.6 cm (3″) water monitors (nozzles) at bow, stern and above wheelhouse
•(2) diesel fire pumps capable of 2500 gpm – can deliver 19,000 litres of water per minute
•(2) 250 gallon tanks for fire suppressant fo... read more 
2022 33′ x 12′ Heavy Aluminum Work Boat
Price:$300,000 CDN
Built BY marine contractors FOR marine contractors!
Transport Canada licensed
Team of 6 Canadian Welding Bureau certified all position welders in a state of the art four season workshop located in Southern Ontario... read more 
38′ x 10′ Russel Brothers Project Boat
•Price: $15,000 CDN
•Molded depth 5.5′, Draft 4′
•Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′
•Shaft size: 1 3/4″, 29″ prop
•Cruising speed: est 9 knots
•CAT engine, hours unknown, 200hp
•Twin disc transmission
•Fuel capacity: 200 gallons
•Accommodations: room for 1 or 2
•Brass wheel and throttle
Location: Northern Ontario... read more
2006 1000 HP Tug/28 ton BP $1,580,000
2006 30.20m x 8.60m x 3.60m 28BP Tugboat
Classification : NK Class
Construction : ABS Grade A mild steel
Port of Registry : Sarawak, Malaysia
Year Built : 2006
Gross Tonnage : 269 tons
Net Tonnage : 81 tons
Length, overall : 30.20 meter
Beam, MLD : 8.60 meter
Depth MLD : 4.30 meter
Draft... read more 
New Sectional Barges
Price: CALL FOR PRICING
Built to order sectional barges
Built BY marine contractors FOR marine contractors!
48 Years experience working on the Great Lakes
Specializing in robust heavily framed sectional steel barges built to withstand heavy equipment traffic on deck
Add spuds and hydraulic ramps to load tri-axle dump trucks or other wheeled and tracked equipment
Location: Georgian Bay, Ontario... read more
1928 26.5' Steel Replica Tugboat $19,950
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built... read more 
33' X 10' Workboat With Winch
Cummins motor
Fitted with a winch
Located in Quebec
Price: $13,250 CDN... read more 
1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug
Price: $225,000 USD
Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
Draft: 5′
Ex USN Portsmouth Lady Submarine Tender
Fresh USCG Subchapter M COI with Great Lakes Route
Powered by 6-71 Detroit, cleanest Detroit around!
Gear is Twin Disc 4.5:1
Topside painted in 2022
Bottom painted in 2021
4 new batteries in 2023
New winches
Safety: all safety gear ... read more