Scruton Marine Services
Scruton Marine Services
49 John Street, Port Dover, Ontario, N0A 1N7, Canada
Contact:Mike Scruton
Telephone: Reveal Telephone Number
Fax: Reveal Fax Number
Website:Visit Website

Scruton Marine is an international marine brokerage company located in Ontario, Canada. We have over 25 years experience sourcing and selling vessels, engines and equipment. Unlike some brokerages we are also experienced in operating commercial boats, barges, engines, etc. We have an extensive list of sources for all things marine including service providers for surveys, towing, salvage, marine construction, etc.


Current View: All Scruton Marine Services Listings (148)  |   North American Listings Only (137)
Used Boats: Commercial Vessels: 148 Adverts   Displaying: 1-50      Layout: Classic Gallery | Quick View | List View
    
   

1954/2012 119' x 34' LCU Landing Craft - New Pictures! 1954/2015 119' x 34' x 5' EX Army Reserve LCU Landing Craft 1466 Class This landing craft was based at Rio Vista, CA for most of her life - in fresh water ABS registered in 2012 US Coast Guard documented for Coastwise use Gross tonnage: 217 tons Net tonnage: 183 tons Front gate: 14'4" wide Capacity: 200 tons Speed: 6.5 knots (loaded or unloaded) Fuel capacity: 3000 gal Fresh water capacity: 3564 gal Navigation equipment: (2) VHF radios, 48 mile Fu... read more
Cutter Basket for 14" Dredge Cutter basket for 14” Dredge  For sand  Keyway 1"x 1/2'  Shaft 4 1/4"  Inside ring is 45 1/4"  Inside of inside ring 38 1/2"  Hub 12" deep x 8" ( 8"? is as best owner can tell/ It has to be turned over to measure)  Like new  Located in Michigan  Price reduced from $1,700 USD to $1,300 USD... read more
20' x 8' x 3' Steel Barge/Push Boat NEW BUILD 20′ x 8′ x 3′ Steel Barge/Push Boat Base Model or Complete Model New Builds Base Model Price: $16,800 USD 1/4″ Mild Steel Shell 3″ x 3″ x 1/4″ Angle framing 2′ On Center Truss System 4 – 14″ Cleats 1 – Hatch Bare Steel Unit Unpainted Location: NY State Complete Model Price: $26,800 USD 1/4″ Mild Steel Shell 3″ x 3″ x 1/4″ Angle framing 2′ On Center Truss System 4 ... read more
1997 48’6 x 16′ x 8’9 GRP Passenger Vessel 1997 48’6 x 16′ x 8’9 GRP Passenger Vessel Price $182,000 CAD •Passenger capacity: 100 •Draft 8’9 •Last survey 2019 •Powered by 2 6 cyl Detroits, 480hp each, 12440 hrs port, 12032 hrs stbd •GRT: 60, NRT: 45 •Fuel capacity: 509 gal •Fresh water capacity: 179.6 gal •Holding tank capacity: 200 litres •Bilge pumps:1 electric, 1 manual •Heads: 2 •Buss heater •SeaStar hydraulic steering •25 fishing... read more
1997 25′ x 8′ Aluminum Work/Patrol Boat 1997 25′ x 8′ Aluminum Work/Patrol Boat •Price: $50,000 CDN •Draft 4’2″ •Built by Armstrong Marine, Sidney BC •Powered by twin Mercury Opti Max 225hp each, 509 hrs port, 1621 stbd •500 litre fuel capacity •Sea Star hydraulic steering •VHF, radar, GPS, plotter, sounder, compass •Comes with trailer •Last survey 2019 •Location: Nova Scotia, Canada File Ref W2389... read more
2014 8′ x 24′ Pontoon Workboat w/ Trailer - For Sale or Lease 2014 8' x 24' Pontoon Workboat w/Crane, c/w Trailer For Sale or Lease •Original frame is 1994 24' Rivera cruiser •Built from the frame up in 2014 •2 18' pontoons bolted in the center •10" draft, 2' molded depth •Custom steel center frame work and mounting plate for crane •Venturo 5k capacity 16' reach crane 12v DC self contained solar recharge - will run all day on the battery - very quiet •1 3500 lb capacity winch &b... read more
1982 45' Gladding Hearn Built Crew Boat 1982 45' x 14.5' Gladding Hearn Built Crew Boat/Patrol Boat Steel hull/ aluminum cabin Twin QSM11 535hp ea Diesel Engines (yr 2000) Cruising speed: 20 to 26 knots 12KW generator Can carry up to 15 persons Boat has always been in fresh water Located in New York State Priced to sell at $155,000 USD Reference No. C2065... read more
Markey Single Drum Towing Winch Markey Single Drum Towing Winch Model TDS-32 Wire Size: 2″ Drum Capacity: 2100′ Style: Single Drum Line Pull: 120,000 Diesel driven – Detroit Diesel with Allison Gear Condition: Excellent – low hour, running takeout Built: 1982 Located in Wisconsin Price: $110,000 USD... read more
2018  180′ x 12′ Floating Bridge or 2 Barges with Ramps 2018 180′ x 12′ Floating Bridge or 2 Barges with Ramps •These custom units were designed as a bridge but could be used as 2 separate barges •2 Barges – 60′ x 10′ x 3.5′ •3 Ramps – 20′ x 11.6′ •Top deck has 1′ over hang support with gussets •Ramps: 1 barge has double ramps, 1 barge has a single ramp •Designed to draw in the middle and lock together for one continuous length •Materials – deck is 1... read more
2020 21' x 8' Aluminum Dory/Work Boat - New Build 2020 21' x 8' Aluminum Dory/Work Boat - NEW BUILD ◦Price: $13,500 CDN ◦3/16 floor with a 3" sub floor and 3/16 checker plate ◦3/16 walls with a 10" wide wash board ◦Weighs about 1500 lbs ◦Location: PEI, Canada File Ref W2388... read more
2008 47' x 14.6' x 5' Steel Model Bow Tug 2008 47’ x 14.6’ x 5’ Steel Model Bow Tug Price: $400,000 CDN Built in Port Lambton, Ontario This tugboat is truckable Gross tonnage: 18.14 tons Net tonnage: 13.61 tons Shell plate thickness: 3/16” Framing: Tubing Bulkheads: 3/16” Headroom: Wheelhouse – 6.5’, Cabin – 7’, Engine room – 7’ Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours Transmission: Twin Disc MG 5114 3:1 ratio Generator: 7.5kw Onan Shaft size: 3&rdquo... read more
2011 Mudcat 8" x 6" Aluminum Dredge 2011 Mudcat MC-910 Aluminum ENV Suction Dredge Principal Dimensions and Characteristics - Custom Built in 2011 - Length Over All: 11.62 m 38.11 feet - Width: 2.74 m 9 feet - Height Over All: 2.68 m 8.8 feet - Draft: 533.4 mm 21 inches - Floating Clearance: 1.80 m 5.9 feet - Fuel Capacity: 1,325 liters 350 gallons Floatation - Pontoons - (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet - .25” thick marine grade aluminum formed with Internal Bulkhea... read more
1990  36' x 9'3 Steel Trapnetter/Minnow Boat 1990 36' x 9.3' x 4.2' Steel Trapnetter/Minnow Boat Price: $17,500 USD- NEW PRICE! •Powered by Chrysler 318, est 50 hours since rebuild •Velvet drive transmission •Cruising speed: 10 mph •Fuel capacity: 50 gal •GRT:9, NRT: 7 • Location: Ohio... read more
1948 39' X 12.7' Steel Trap Net Boat 1948 39' x 12.7' Steel Trapnetter Price: $30,000 USD - New Price! •Powered by Lehman Ford Diesel, 120hp •Cruising speed: 9 mph •Fuel capacity: 100 gal •Electronics: radio, depth sounder, compass •GRT:14, NRT: 10 •Vertical capstan Location: Ohio... read more
1971 45' x 14'6" x 4' Camcraft  Crew Boat 1971 45' x 14'6" x 4' Aluminum Camcraft Crew Boat Originally built for US Coast Guard Engines: Twin 8V71 Detroit Diesel Engines are fresh rebuilds - less than 100 hrs on each of them Transmissions: 2:1 ratio Top speed: 22 knots Set up for dual station steering Accommodations: 4 bunk beds Headroom: 6'8" Fuel capacity: 300 gals in two 150 gal tanks Watertight bulkheads: 4 Rear deck: Dimensions are 15' x 14' Head: Yes Comments from the owner:... read more
1954 45' X 13' X 5' Tug - Now $60k! 1954 45′ x 13′ x 5′ Tug •Price: $60,000 USD - New price •Gross Tonnage: 15, Net: 10 •Shell plating thickness: .245″ by ultrasonic testing •Headroom: 6′ pilot house, galley, engine room •Cruising speed: 10 knots •Powered by: Detroit 8V-71 Natural, 365 hp, 2200 hrs +/-, serial number 7082-3000, twin disc MG514654 4.5:1 •Generator: Lima electric with a 4-236 Bowman diesel, 20KW, 3 phase, keel cooled •Winches: 20 ton ex mi... read more
Used Almon Johnson Single Drum 100,000 lb Line Pull Winch Used Almon Johnson Single Drum 100,000# Line Pull Winch 2100 ft of 2" wire Speed: 30 feet per/ min Single drum Weight: 35,000 lbs Removed from Great Lakes tugboat during conversion In very good condition Located in New York State Price: $39,000 USD Reference No. WH2098... read more
2008 60' x 16' Tri-toon Passenger Vessel 2008 60′ x 16′ Tri-toon Passenger Boat Price $295,000 USD •Built in Florida •Draft is 4.4′ to bottom of stern drive •Comfortably accommodates 15-20 on top deck, 20-30 on lower deck •Pontoons are 42″ in diameter, 1/8″ aluminum and 5′ long sections with water tight compartments and an inspection port in each pontoon •Powered by twin Yanmar 200 hp, 4 cyl diesel engines with Mercury Bravo II stern drives Average speed 12-14 kno... read more
1996   64'11" x 18'6"  Aluminum 100 Passenger Vessel and Successful Tu 1996 64'11" x 18'6" Aluminum 100 Passenger Vessel and Successful Turn Key Business Price $995,000 CAD •Passenger capacity: 100 + 5 crew •Profitable turn key operation, full crew of excellent staff, located in busy metropolitan area •Max draft is 3' •Built in British Columbia, keel laid in 1987, rebuilt 1996 •Last survey 2019 •Last dry dock: 2017 Next dry dock: 2022 •Powered by 2 Volvo Penta TMD1 (1997), 4000 hours •... read more
1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities 1978 76′ x 21′ x 8.5′ Fire Class Tug w/ Tractor Capabilities •Price: $600,000 CDN •Gross Tons: 140 •Flag: Canadian •Powered by: (2) 455hp diesel Z-drives and a hydraulic tunnel bow thruster • (3) manually controlled 7.6 cm (3″) water monitors (nozzles) at bow, stern and above wheelhouse •(2) diesel fire pumps capable of 2500 gpm – can deliver 19,000 litres of water per minute •(2) 250 gallon tanks for fire suppressant foam i... read more
PROJECT BOAT - 1950 38' Russel Bros Tug 38′ x 10′ Russel Brothers Project Boat •Price: $15,000 CDN •Molded depth 5.5′, Draft 4′ •Headroom: Wheelhouse – 6.5′, Cabin 6.5′, Engine room 6.5′ •Shaft size: 1 3/4″, 29″ prop •Cruising speed: est 9 knots •CAT engine, hours unknown, 200hp •Twin disc transmission •Fuel capacity: 200 gallons •Accommodations: room for 1 or 2 •Brass wheel and throttle Location: Northern Ontario... read more
2020 8′ x 20′ Push Boat 2020 8′ x 20′ Push Boat • 10 gauge steel •Light draft approx. 8″ •With console, push knees, motor bracket, 1 coat primer •1 hatch •Framed on 16″ •Price $13,000 CDN •Located in Port Dover, Ontario File W2367... read more
19’6 x 6’6 Aluminum Work Boat 19’6 x 6’6 Aluminum Work Boat •Price: $10,000 CDN •Bottom 3/16″, Sides 1/8″ •Located near Port Dover, Ontario File Ref W2385... read more
24′ x 8′ Steel Work Boat w/ Trailer 24′ x 8′ Steel Work Boat w/ Trailer •Price: $6,000 CDN •Comes with tandem trailer •Comes with 175hp Yamaha •Located near Port Dover, Ontario File Ref W2384... read more
2006 1000 HP Tug/28 ton BP 2006 30.20m x 8.60m x 3.60m 28BP Tugboat Classification : NK Class Construction : ABS Grade A mild steel Port of Registry : Sarawak, Malaysia Year Built : 2006 Gross Tonnage : 269 tons Net Tonnage : 81 tons Length, overall : 30.20 meter Beam, MLD : 8.60 meter Depth MLD : 4.30 meter Draft... read more
New 40' Rear Cabin Alum Landing Cra New 40' x 142" Aluminum Rear Cabin Landing Craft (3) independent air chambers Twin 300hp 4 stroke Suzuki outboards 3600 LP Onan Generator Commercial RV rooftop AC Enclosed 144"L x 100"W x 8'H cabin Hydraulic bow gate Located in Missouri Custom built 40’ long x 142” wide rear cabin landing craft hull, 20 degree dead rise, twin outboard, with integrated motor flotation pod, formed gunnel tops and 3 independent air chambers. This hull is custom designed... read more
42' Steel Shugart Push Boat 1987 42' x 14' x 3' STEEL SHUGART PUSH BOAT -MFG BY SHUGART MANUFACTURING -VESSEL IS COMPRISED OF 4 SECTIONS THAT ARE PINNED TOGETHER -VESSEL CAN BE PINNED TO SHUGART TYPE SECTIONAL BARGES -PILOT HOUSE AND ENGINES ARE EASILY REMOVED -VESSEL IS TRUCKABLE -ALL EQUIPMENT/MACHINERY IS ABOVE DECK - NO BILGE - HULL IS SEALED -POWER: 2 DETROIT 471 POWERING HYDRAULIC AZIMUTHING TYPE PODS -KAPLAN STYLE PROPELLERS IN NOZZLE/POD - RECON FALL 2010 -REMOVEABLE PUS... read more
New 33' x 11' Aluminum Landing Craft - to be built New 33' x 11' Aluminum Landing Craft - to be built Can be powered by I/O diesel engines or outboard motors Diesel engines can be cooled by keel coolers or radiators on the roof. Wheelhouse is 6' x 6' Gate is 7' wide by 4' long This landing craft work boat can be customized to suit buyer's needs. A photo of similar LC is shown above To be built in Ontario, Canada Price on request Reference No. LC2110... read more
1928 26.5' Steel Replica Tugboat 1928 26'6" x 8' x 3.6' Steel Replica Tugboat 27' tugboat replica Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water. All supporting and historical documents will be supplied to buyer at time of sale. Original boat is constructed of 1/4" steel Original hull is galvanized at waterline Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate Original hull is riveted and was built... read more
26 Steel Twin Screw Work/Tow Boat 1993 26' x 11' x 3.5' Steel Twin Screw Work/Tow Boat 9 gross tons 2 x 4-53 Detroits with low hrs Propellers: 24" x 24", 4 blade props Cruising speed: 16 kts Maximum speed: 18 kts 200 gal fuel capacity. Twin 100 gal tanks, Duplex Raycor 1000 filters Hydraulic Steering Electronics: Raytheon Radar, Depth Sounder, VHF Running and tow lights Trailerable Originally was used to move a 110' x 30' barge with 40 ton crane Located in New York State Price rec... read more
1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel 1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel Price: $70,000 CDN •Gross Tons: 68.09, Net Tons: 57.6 •Powered by Volvo TMD-100 (new injectors 2018) •Twin Disc Gear 3:1 Fuel consumption around 4 gph •38 x 28 4 blade wheel, shaft 3.5″ stainless •Palfinger crane with winch, 24′ reach 1600 lb capacity •Hiab crane 32′ reach 2.5 ton capacity •4-man Ovatek life raft •Hydraulic pulling machine •3&Pri... read more
33' x 10' Steel Workboat With Winch 33' X 10' Workboat With Winch Cummins motor Fitted with a winch Located in Quebec Price: $13,250 CDN... read more
42.5' Aluminum Crew Boat 1968 42.5' x 14.5' x 3'10" Ex U.S. Army Corps of Engineers Crew Boat Engines: Twin 8V-71 Detroit Diesel engines - total 600 hp- to be installed Transmissions: Twin Allison transmissions Generator: 20KW genset Fuel capacity: 1,000 gal Accommodations: No Head: Yes COI: This crew boat was used by U.S. Army Corps of Engineers and was not subject to COI Additional information: The forward hull is fitted with an angle iron spray rail in way of the port and starboard side... read more
1969 73' x 17' Halter Built Work Boat 1969 22.25m x 5.18m Halter built Aluminum Work Boat Price: $150,000 USD Built by Halter Boats, New Orleans, LA Molded Depth: 3.05m, Draft 1.22m Gross tonnage: 43 tons Net tonnage: 32tons Shell plate thickness: 5/16″ Framing: 3″x 5/16″ @ 1″C Bulkheads: 1/4″ Headroom: Wheelhouse & Cabin – 6’4″, Engine room – 5′ Last survey: 2012 (Transport Canada) (2) Detroit Diesel 4 stroke, 6 cyl 60 Series – – to... read more
New 20' x 8' x 30" Steel Barge 2020 20′ x 8′ x 30″ Barge (Other sizes available call for a quote) - New Build Price: $11,000 CDN •10 gauge shell •Framed on 16″ •1 deck hatch •4 cleats •Raked on one end •Capacity 9000 lbs •Weight approx. 3500 lbs Location: Port Dover, Ontario... read more
2020 24’6″ x 9′ Steel Work Boat w/ Wheelhouse 2020 24’6″ x 9′ Steel Work Boat w/ Wheelhouse - New Build •Price: $22,000 CDN Motor may be available at additional cost •Hydraulic steering •Boat is 9′ wide at max, 8′ wide deck •15′ of deck ahead of wheelhouse •4″ pipe side cap •(2) 4″ spud pockets aft •10 gauge construction •Light freeboard 9″ forward, 5″ aft •6’8″ headroom in wheelhouse •Located in Port Dover F... read more
1955/2008 65' PAX Boat & Busine TURNKEY PASSENGER VESSEL, With BUSINESS, FOR SALE 65’ x 16’ x 5.5’, 46.50 Gross Tons, Russel Bros. built 1955 ex. "Maid of the Mist" passenger vessel AGCO/LLBO Liquor license transferable to new owner Certified for 64 passengers and 4 crew in Minor Waters II/ Sheltered Waters Built in 1955 by Russel Hipwell, Owen Sound, Ontario Hull was originally built to be used as an Arctic Research Vessel – very heavily built 2 x D333C Caterpillar engines NorPro 9 KW ... read more
(2) 1988 195' x 35' x 12' Jumbo River Hopper Barges (2) 1988 195′ x 35′ x 12′ Jumbo River Hopper Barges •Box ends •Fair Condition Capacity 1500 tons each •Need some steel work •Location: New York State Details are deemed to be correct but are not guaranteed and should be independently verified.... read more
146' x 38' x 17.5' Cape Class Hopper Barge 146′ x 38′ x 17.5′ Cape Class Hopper Barge •5′ bin walls •Good condition Capacity 1000 tons •Heavily built •Built 1950, Dry docked in 2017 •Location: New York State Details are deemed to be correct but are not guaranteed and should be independently verified.... read more
1985 21' x 8' Aluminum Work Boat 1985 21' x 8' Aluminum Work Boat ◦Price: $42,500 CDN ◦Draft 32" ◦Shell plate thickness: 1/4" bottom, 3/16" sides and deck and pilothouse ◦Powered by: Volvo Penta AD41P-A, (2014), 200 hp ◦Fuel capacity: 200 litres ◦Volvo Duo Prop ◦Other: Ritchie compass, cable steering, 2+ manual bilge pumps, Webasto AT2000D heater ◦Boat is in good overall condition ◦Location: Quebec ◦***Trailer also available*** File W2387... read more
PROJECT BOAT - 1945 35' Russel Bros Alligator Boat 1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat •Price: $15,000 CDN •Molded depth 4′, Draft 3′, Height 10.5′ •Shell Plating: 1/4″ •Headroom: Wheelhouse – 7′, Cabin 7′, Engine room 6′ •Shaft size: 1 1/2″, 28″ prop •Cruising speed: est 9 knots •Cummins engine, hours unknown, 200hp •Winch is Russel Bros 50hp, 75 rpm, model 93 •Fuel capacity: 200 gallons &b... read more
2011 26.48m x 11m Multicat Eurocarrier 2611 2011 26.48m x 11m Multicat Eurocarrier 2611 •Price: € 4.9 million •Draft 2.8 m (tanks 98% full) •Deck space 125 metres², Deck load 6 tonne/sq metre •Class: MCA Cat 1 150 miles from safe haven •Propulsion: 2 CAT C32, 780 bhp each •Bow Thruster: 250 hp electric •Bollard pull: 33 tonne •Generator: 2 CAT C9 250Kva •Deck Equipment: 2 cranes – Fwd Hella 25t @ 7 metre, 10.5t @ 16.31 metre; Aft Hella 26t @ 5.67 metre, 10t @ 12.17 metr... read more
1976/2004 60.99' Steel Crew Boat 1976/2004 60.99’ x 16.99’ x 7.48’ Steel Crew Boat Built in 1976 by Halter Marine, Louisiana Rebuilt in 2004 – 50% of the steel plate on hull was replaced Gross tonnage: 39 tons Net tonnage: 29 tons Shell plate thickness: 3/16”/1/8” Bulkheads: 3 Headroom: Wheelhouse – 6’2”, Cabin – 6’6”, Engine Room – 6’ Engines: 2 x 12V71T Detroit Diesel engines – total hp 950 – rebuilt in 2003 – 500 hou... read more
1976   134'9  x  29'  LCU 1976 134'9 x 29' LCU •Price: $525,000 USD •4.5' draft •Powered by twin 12v71s •Props are steerable kort nozzles with flanking rudders •(2) 40 kw 3-71 generators •200 ton cargo capacity •18' between the walls •Accommodations for 8 •Updated interior, galley, shower, head •Hydraulic bow spud •2,000 lb stern anchor with winch •For sale or charter •Located in New York State Details are deemed ... read more
1977 50' x 15' Aluminum 98 Passenger Tour/Dinner Boat 1977 50′ x 15′ Aluminum 98 Passenger Tour/Dinner Boat Price $325,000 CDN •98 passengers plus 3 crew •Built in Canada •Last survey 2012 •Aluminum construction •3/16″ shell plating thickness •Gross Tonnage: 56.46 tons •5’2″ Moulded depth, 30″ Draft •Cruising speed 10-12 knots •Two Volvo Penta AQAD-41, 2 x 180 hp, 3000 hours since last rebuild •Twin Volvo Penta stern drives 1.61:1 ratio •Gener... read more
1960 43' Ex USCG Charter/Dive Boat 1960 43' x 14' x 3.5' EX USCG Fiberglass/Wood Composite Charter Boat/Dive Boat Seating for 45 passengers Built in Newport Beach Last survey: 2010 Molded depth: 5.5' Gross tonnage: 13 tons Net tonnage: 10 tons Hull thickness: 1" Bulkheads: 3/4" thick Headroom in Wheelhouse: 6', Engine room: 3' with deck hatch Engine: 6 cyl Cummins, 250 hp, year 2002 Transmission: Twin Disc Shaft size: 2" Propeller: 25" x 20" Steering: Hydraulic Cruising speed: 10 knot... read more
Timberland Double Drum Winch - 27,000 # Line Pull Timberland Double Drum Winch – 27,000 # Line Pull • Timberland model 400-2-25 • 2 drums 36” x 54” • 27,000 lb. Line pull • Deutz Diesel – 6 cylinder with reverse transmission • C/w cabin • Brake and safety lock • Completely rebuilt • Located in Quebec • Price $98,500 CDN Reference No. WH2018... read more
Timberland Winch - 200,000 lbs Timberland Winch - 200,000 lbs 500 hp Cable size 1.5" up to 2.5" Dimensions: w:12.3', l: 25', h: 11' Drum height 12' Located in Quebec, Canada Price: $262,500 CDN also available to lease Reference No. W2097... read more
5 Drum 35 ton Madill Winch 5 Drum 35 ton Madill Winch Built by S. Madill, Nanaimo, BC Model # 5-30024 Single Line Pull – 35 tons 5 drums Powered by 4-71 Detroit Diesel Winch & engine have been completely refurbished Never used since rebuilt Located near Port Dover, Ontario, Canada Price: $35,000 CDN Reference No. WH2075... read more
2009   50’10” x 19’10” Damen Multi Cat 2014/2017 50’10” x 19’10” Damen Multi Cat Price: $1,800,000 CDN Rebuilt 2017 •Available October 2019 •Draft: 5’7″ aft Steel thickness 10mm •GRT: 46.71 •Powered by 2 Scania i13 071M 2 x 400hp @ 1800 rpm •Twin disc gears MG5095SC, 2.95:1 •Max speed: 8.4 knots •Bollard pull: 7.6 tons •Deck capacity: 20 tons max between frame 5 and 9 •Deck crane: Heila 20-2S, 2.2mtons at 8.60 meters •Anchor winch, ... read more


3 Pages:  1  | Next